The automobile windshield chip repair problem with ignoring the damage is that it will grow worse with time. Replacements have their downsides as well. Besides spending up to $350, you lose the original manufacture seal. Many replacements are done incorrectly and can leak and crack. What is the alternative?
For that reason, many companies will happily waive the deductible if the existing windshield can be repaired. So you may be able to have that chip or crack fixed without paying anything at all.
Replacing a car's windshield can be quite a costly affair. An alternative could be to try to repair your windshield, although this will only be feasible for smaller cracks. For any large cracks, you'll have to replace your windshield. There is however a number of steps you could take to ensure that you find a good and cheap automobile windshield chip repair deal.
Do-it-yourself repairs are the cheapest option but if not done correctly, it may cost you more. If you plan to do it yourself, it is important to choose the best kits. Research or seek the advice of experts so you would not be sorry. There are two types of windshield repair kits. The first is the less expensive syringe-type. The kit includes a syringe and the resin, intended for one-time use only. It contains just enough resin to repair one chip. The second type is the more expensive bridge system that includes the resin's and a plastic bridge. This type can be used several times because it is refillable.
Stay away from the sun. Park inside a garage when you can and use a protective windshield covering when you can't. If you let heat build up inside the car while you park, you might weaken the windshield and cause the crack to grow.
Thread the repair tube into the suction cup tool since the suction cup is directly over the damaged area. You may need to screw it tightly but don't use any tools, just your hands. The proper alignments of the tools are very essential in repairing windshield, which is why you have to check from inside the car if the rubber is directly on the top of the damage area. Now you have to open up the supper tube and add it to the repair tube. Add drops of repair resin and then put a film underneath the resin and let it dry for ten minutes.